當前位置：上海朕鋅電氣設備公司>>>>6ES7 416-2XN05-0AB0

6ES7 416-2XN05-0AB0

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號6ES7 416-2XN05-0AB0

品牌

廠商性質經銷商

所在地上海市

在線詢價收藏產品查看聯系電話

聯系方式：田敏查看聯系方式

更新時間：2018-06-05 01:09:40瀏覽次數：190次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  西門子PLC

暫無信息

上海朕鋅電氣設備公司

經營模式：經銷商

商鋪產品：955條

所在地區：上海上海市

聯系人：田敏（銷售工程師）

詢價 給他留言

產品簡介

6ES7 416-2XN05-0AB0
CPU
16ES7211-0AA23-0XB0CPU221 DC/DC/DC,6輸入/4輸出
26ES7211-0BA23-0XB0CPU221 繼電器輸出,6輸入/4輸出

詳細介紹

6ES7 416-2XN05-0AB0西門子PLC 6ES7 416-2XN05-0AB0西門子代理

西門子銷售

   田敏（銷售工程師）      主營產品（西門子）SIEMENS
手機          可編程控制器（PLC）   人機界面（HMI）
          數控伺服   工業以太網
傳真          數控系統   電線電纜
商務   2304334979      變頻器   伺服驅動
地址   上海市金山區楓蘭路128號   以上產品*，質量保證！

Area of application

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

Design

Both CPUs are equipped with the following:

Powerful processor:
The CPUs achieve instruction execution times as low as 0.03 μs per binary instruction.
CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);
CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);
CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);
fast RAM for parts of the user program relevant to execution.
Flexible expansion:
Up to 262144 digital and 16384 analog inputs/outputs.
Multi-point interface MPI:
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
Mode selector switch:
Designed as toggle switch.
Diagnostics buffer:
The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
Real-time clock:
The date and time are appended to diagnostic messages of the CPU.
Memory card:
For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

A module slot:
An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

PROFINET interface with 2 ports (switch):
- PROFINET I/O, 256 IO devices connectable
- PROFINET CBA

Functions

Block protection:
A password concept protects the user program from unauthorized access.
Integral HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communications functions:
- PG/OP communication
- Shared data communication
- S7 standard communication
- S7 communication
Firmware update using network

CPU 416-3 PN/DP additional:

Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
Distributed inligence in Component Based Automation (CBA) on PROFINET
Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multi-point interface MPI:
- Definition of station addresses.
- Startup/cycle behavior
- Stipulation of the maximum cycle time and communications load
Address assignment:
Addressing of I/O modules.
Retentive ranges:
Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
Size of the process image, local data.
Length of the diagnostics buffer
Protection level:
Definition of access authorization for program and data
System diagnostics:
Definition of the handling and scope of diagnostic messages
Timed interrupts:
Setting of periodicity

CPU 416-3 PN/DP additional:

PROFINET interface
Parameterization of time synchronization using NTP procedure

Indication and information functions

Status and error indicators:
LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
Test functions:
The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
Information functions:
The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

Technical Specifications

Order number	6ES7416-2XN05-0AB0	6ES7416-3XR05-0AB0	6ES7416-3ES06-0AB0
	CPU 416-2, MPI, PROFIBUS, 5.6 MB	CPU 416-3, 11.2 MB, 3 INTERFACES	CPU416-3 PN/DP, 16 MB, 3 INTERFACES
Product type designation
General information
Engineering with
● Programming package	STEP7 V 5.3 SP2 or higher with HW update	STEP7 V 5.3 SP2 or higher with HW update	STEP7 V5.5 or higher/iMap V3.0 + iMap STEP7 Add-on V3.0 SP5 or higher
Supply voltage
Rated value (DC)
● 24 V DC		No; Power supply via system power supply	No; Power supply via system power supply
Power losses
Power loss, typ.	4 W	5.5 W	6.5 W
Memory
Work memory
● Integrated	5.6 Mbyte	11.2 Mbyte	16 Mbyte
● integrated (for program)	2.8 Mbyte	5.6 Mbyte	8 Mbyte
● integrated (for data)	2.8 Mbyte	5.6 Mbyte	8 Mbyte
Load memory
● expandable FEPROM, max.	64 Mbyte	64 Mbyte	64 Mbyte
● integrated RAM, max.	1 Mbyte	1 Mbyte	1 Mbyte
● expandable RAM, max.	64 Mbyte	64 Mbyte	64 Mbyte
CPU processing times
for bit operations, typ.	30 ns	30 ns	30 ns
for word operations, typ.	30 ns	30 ns	30 ns
for fixed point arithmetic, typ.	30 ns	30 ns	30 ns
for floating point arithmetic, typ.	90 ns	90 ns	90 ns
IEC counter
● present	Yes	Yes	Yes
IEC timer
● present	Yes	Yes	Yes
Data areas and their retentivity
Flag
● Number, max.	16 kbyte	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area
Address area
I/O address area
● Inputs	16 kbyte	16 kbyte	16 kbyte
● Outputs	16 kbyte	16 kbyte	16 kbyte
Process image
● Inputs, adjustable	16 kbyte	16 kbyte	16 kbyte
● Outputs, adjustable	16 kbyte	16 kbyte	16 kbyte
Hardware configuration
Slots
● Required slots	1	2	2
Time of day
Clock
● Hardware clock (real-time clock)	Yes	Yes	Yes
Operating hours counter
● Number	8	16	16
Interfaces
Interface/bus type		1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)	1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces	2	2	1
Number of other interfaces	0	0	0
1st interface
Interface type	Integrated	Integrated	Integrated
Physics	RS 485 / PROFIBUS	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI
Functionality
● MPI	Yes	Yes	Yes
● DP master	Yes	Yes	Yes
● DP slave	Yes	Yes	Yes
DP master
● Number of DP slaves, max.	32	32	32
2nd interface
Interface type	Integrated	Integrated	PROFINET
Physics	RS 485 / PROFIBUS	RS 485 / PROFIBUS	Ethernet RJ45
Number of ports			2
Functionality
● DP master	Yes	Yes	No
● DP slave	Yes	Yes	No
● PROFINET IO Controller			Yes
● PROFINET IO Device			Yes
● PROFINET CBA			Yes
DP master
● Number of DP slaves, max.	125	125
PROFINET IO Controller
● Max. number of connectable IO devices for RT			256
● Number of IO devices with IRT and the option "high flexibility"			256
● Number of IO Devices with IRT and the option "high performance", max.			64
3rd interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface	Pluggable interface module (IF)
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)	IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS	RS 485 / PROFIBUS
Functionality
● MPI		No	No
● DP master		Yes	Yes
● DP slave		Yes	Yes
DP master
● Number of DP slaves, max.		125	125
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes; For PROFIBUS only	Yes; Via PROFIBUS DP or PROFINET interface
Communication functions
PG/OP communication	Yes	Yes	Yes
Data record routing		Yes	Yes
Global data communication
● supported	Yes	Yes	Yes
S7 basic communication
● supported	Yes	Yes	Yes
S7 communication
● supported	Yes	Yes	Yes
S5-compatible communication
● supported	Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
Standard communication (FMS)
● supported	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
Open IE communication
● TCP/IP			Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.			94
● ISO-on-TCP (RFC1006)	Via CP 443-1 Adv. and loadable FB	Via CP 443-1 and loadable FB	Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
— Number of connections, max.			94
● UDP			Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.			94
Web server
● supported	No; Via CP	No	Yes
Number of connections
● overall	64	64	96
Configuration
programming
Programming language
— LAD	Yes	Yes	Yes
— FBD	Yes	Yes	Yes
— STL	Yes	Yes	Yes
— SCL	Yes	Yes	Yes
— CFC	Yes	Yes	Yes
— GRAPH	Yes	Yes	Yes
— HiGraph?	Yes	Yes	Yes
Know-how protection
● User program protection/password protection	Yes	Yes	Yes
● Block encryption			Yes; With S7 block Privacy
Dimensions
Width	25 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm
Depth	219 mm	219 mm	219 mm
Weights
Weight, approx.	720 g	0.9 kg	900 g