General purpose industrial valves—Flanged steel globe valves and lift check valves
GB/T1241-1983
船用外螺紋鍛鋼截止止回閥
Marine forged steel male thread stop and check valves
GB/T12233-1989
通用閥門鐵制截止閥與升降式止回閥
General purpose industrial valves—Casting iron globe valves and lift check valves
GB/T12236-1989
通用閥門鋼制旋啟式止回閥
General purpose industrial valves—Steel swing check valves
GB/T13932-1992
通用閥門鐵制旋啟式止回閥
General purpose industrial valves--Cast iron swing check valves
GB/T18691-2002
農業灌溉設備止回閥
Agricultural irrigation equipment--Check valves
GB/T1952-1980
船用低壓外螺紋青銅止回閥
Low bressure bronze male screw-thread check valve for marine use
GB/T597-1983
船用外螺紋青銅止回閥
Marine bronze male thread lift check valves
GB/T592-1993
船用法蘭鑄鐵止回閥
Marine cast iron flanged lift check valves
GB/T591-1993
船用法蘭鑄鐵截止止回閥
Marine cast iron flanged stop check valves
GB/T586-1999
船用法蘭鑄鋼止回閥
Marine cast steel flanged check valves
GB/T588-1993
船用法蘭青銅截止止回閥
Marine bronze flanged stop check valves
GB/T589-1993
船用法蘭青銅止回閥
Marine bronze flanged check valves
GB/T596-1983
標準編號
標準中文名稱
標準英文名稱
DIN 3269-1-1988
地段和建筑物內飲水裝置用管件.止回閥PN10.要求
（Valves for domestic drinking water installations; check valves PN 10; requirements）
DIN 87101-1975
垂直型.公稱寬度50-150.公稱壓力1.自閉式止回閥.符合公稱壓力的法蘭連接
（Non-return flaps （storm valves）, self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10）
DIN 3441-5-1984
非增塑聚氯乙烯管件.壓緊止回閥PN6和PN10.尺寸
（Unplasticized polyvinyl chloride （PVC-U） valves; PN 6 and PN 10 wafer type butterfly valves; dimensions）
DIN 87104-1975
DIN87101止回閥用閥插入件
（Flap Inserts for Non-return Flaps in accordance with DIN 87101）
DIN 3247-1985
無止回閥.帶法蘭的吸濾器
（Flanged suction strainers without non-return valve）
DIN 87106-1975
DIN87101止回閥用定位裝置
（Locking Devices for Non-return Flaps in accordance with DIN 87101）
DIN 3259-1985
帶止回閥的法蘭吸濾器（腳閥）
（Flanged suction strainers with non-return valve）
DIN 477-4-1982
氣瓶閥.輕便儲氣瓶頸的止回閥
（Compressed gas cylinder valves; swing check valves for camping-cylinders）
DIN 3538-1986
煤氣裝置管件.止回閥.內螺紋接頭
（Valves for gas installations; butterfly valves; female threaded ends）
DIN 3248-1985
無止回閥.帶內螺紋連接的吸濾器
（Threaded suction strainers without non-return valve）
DIN 3249-1985
帶止回閥.內螺紋連接的吸濾器（腳閥）
（Threaded suction strainers with non-return valve）
DIN EN 1074-3-2000
供水用閥門.適用性要求和檢查試驗.第3部分:止回閥
（Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000）
浙江三精閥門有限公司環保在線設計制作，未經允許翻錄必究.Copyright(C) http://www.598km.com, All rights reserved.
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，環保在線對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
