污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
津市市石油化工儀器有限公司
燃料膠質含量測定器JSR0601
產品型號:JSR0601
產品名稱:燃料膠質含量測定器JSR0601
產品說明:
JSR0601燃料膠質含量測定器(噴射蒸發法)
一、符合GB/T8019、ASTM D381、ISO6246標準
二、主要技術參數:
熱浴尺寸:φ52×70mm 5孔 金屬浴
加熱方式:鑄鋁電熱板加熱
控溫方式:數顯溫控自動控溫
加熱溫度范圍:160~165℃
控溫精度:±1℃
氣體流量:5×600mL/s±90 常溫常壓下
工作電源:AC220V±10% 50HZ
三、性能及特點:
1、采用數顯溫控儀控溫,溫度顯示直觀,抗干擾性強,
測溫精度高,且操作簡便;
2、采用金屬浴,加熱速度快,溫度誤差小,準確可靠,維修方便;
3、氣路系統中,用5支流量計分別測定每個孔的出氣流量,流量準確,觀察方便;
4、熱浴有5孔,氣流均勻,可以同時對比做樣。
JSR0601 fuel gelatinometer (jet evaporation method)
I. Comply with GB/T8019, ASTM D381, ISO6246 standards
Ii. Main Technical parameters:
Hot bath size: 52×70mm 5-hole metal bath
Heating mode: cast aluminum heating plate heating
Temperature control mode: digital display temperature control automatic temperature control
Heating temperature range: 160~165℃
Temperature control accuracy: ±1℃
Gas flow rate: 5×600mL/s±90 at normal temperature and pressure
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. Adopting digital display temperature controller to control temperature, temperature display is intuitive and has strong anti-interference.
High temperature measurement accuracy, and easy to operate;
2. Adopt metal bath, heating speed is fast, temperature error is small, accurate and reliable, maintenance is convenient;
3. In the air path system, 5 flowmeters are used to measure the air flow rate of each hole, which is accurate and easy to observe.
4. The hot bath has 5 holes, and the airflow is uniform, so the samples can be compared at the same time.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份