產品型號：JSH0101產品名稱：潤滑油氧化安定性測定儀JSH0101產品說明：JSH0101潤滑油氧化安定性測定儀一、符合SH/T0193、ASTMD2272標準二、主要技術參數：控溫方式：溫控器PID控溫控溫精度：150±0

詳細介紹

產品型號：JSH0101

產品名稱：潤滑油氧化安定性測定儀JSH0101

產品說明：

JSH0101潤滑油氧化安定性測定儀

一、符合SH/T0193、ASTMD2272標準

二、主要技術參數：

控溫方式：溫控器PID控溫

控溫精度：150±0.1℃

測溫方式：高精度鉑電阻測溫

功率：1.6kw

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、儀器采用金屬浴代替油浴，*解決了油浴氣味大、污染大、氧彈難清洗的弊端，消除了對操作者油煙的危害和環境污染，也簡化了操作。

2、改氧彈旋轉為試瓶旋轉，試瓶在彈筒內旋轉速度平穩無噪音。

3、儀器采用進口高精密控溫表PID溫度控制，其溫度穩定，使用壽命長，精確可達0.1℃；

4、儀器采用內置工控機，全自動模式工作，10.1寸觸摸屏，全中文界面簡單清淅，試驗部分和控制部分合二為一，臺式結構，外形美觀，操作方便。，自動記錄壓力及其變化過程，并用曲線的方式描繪出來，能自動判別轉折點；

5、采用風冷系統降溫，縮短連續試驗的時間間隔。

6、系統自帶減壓系統，能方便地調整氣源壓力到所需值，方便充放氣操作。

7、采用精密壓力傳感器，檢測彈筒內部的壓力，測試數據穩定可靠；采用高精度溫度傳感器自動檢測控制金屬浴溫度。

8、儀器采用進口高精密控溫表PID溫度控制，其溫度穩定，使用壽命長，精確可達0.1℃；

9、試驗過程中，整個充、放氣過程由系統自動完成，所充的壓力可由屏幕顯示的畫面直接反應出來，在充、放氣完畢后，系統能自動判別是否泄漏。配有詳細的幫助文檔，便于操作使用。

10、采用風冷系統降溫，縮短連續試驗的時間間隔。

JSH0101 lubricating oil oxidation stability tester

I. It conforms to SH/T0193 and ASTMD2272 standards

Ii. Main Technical parameters:

Temperature control mode: temperature controller PID temperature control

Temperature control accuracy: 150±0.1℃

Temperature measurement: high precision platinum resistance temperature measurement

Power: 1.6 kw

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. The instrument adopts metal bath instead of oil bath, which completely solves the disadvantages of oil bath such as big smell, big pollution and difficult cleaning with oxygen bomb, eliminates the harm to operators' lampblack and environmental pollution, and also simplifies the operation.

2. Change the rotation of the oxygen bomb to the rotation of the test bottle, and the rotating speed of the test bottle in the cylinder is stable and noiseless.

3, the instrument adopts imported high precision temperature control table PID temperature control, its temperature stability, long service life, accurate up to 0.1℃;

4. The instrument adopts built-in industrial control computer, automatic mode, 10.1-inch touch screen, simple and clear Chinese interface, combined test part and control part, desktop structure, beautiful appearance, easy to operate. , automatically record the pressure and its change process, and draw it out by means of curve, which can automatically identify the turning point;

5. Adopt air cooling system to reduce the temperature and shorten the time interval of continuous test.

6. The system has its own pressure reducing system, which can easily adjust the air source pressure to the required value and facilitate the operation of charging and discharging.

7. Precise pressure sensor is adopted to detect the pressure inside the cylinder, and the test data is stable and reliable; High precision temperature sensor is used to automatically detect and control the temperature of metal bath.

8, the instrument adopts imported high precision temperature control table PID temperature control, its temperature stability, long service life, accurate up to 0.1℃;

9. During the test, the whole process of charging and venting is completed automatically by the system, and the pressure can be directly reflected from the screen. After charging and venting, the system can automatically determine whether there is a leak. With detailed help documentation, easy to operate and use.

10. Adopt air cooling system to reduce the temperature and shorten the time interval of continuous test.

關鍵詞：氧化安定性測定儀金屬浴工控機壓力傳感器溫度傳感器