產品型號：JSH2402產品名稱：自動潤滑油蒸發損失測定器JSH2402產品說明：JSH2402自動潤滑油蒸發損失測定器一、符合SH/T0059、ASTMD5800標準二、主要技術參數：熱浴尺寸：Φ60×48（mm）金屬浴加熱功率：2KW工作溫度：常溫～250±0

詳細介紹

產品型號：JSH2402

產品名稱：自動潤滑油蒸發損失測定器JSH2402

產品說明：

JSH2402自動潤滑油蒸發損失測定器

一、符合SH/T0059、ASTMD5800標準

二、主要技術參數：

熱浴尺寸： Φ60×48（mm）金屬浴

加熱功率： 2 KW

工作溫度：常溫～250±0.5℃

負壓檢測：壓力傳感器和斜管式壓力計測壓

溫度測控：數顯溫控儀自動測控溫度

控制方式：單片機自動調節壓力，自動計時，到時報警。

抽氣方式：空氣泵抽氣

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、加熱體采用板塊式結構，即底部加熱盤和四周加熱圈方式，加熱體不易燒壞，壽命長。

2、溫度控制采用數顯溫控儀自動以PID方式控制溫度，控溫精度高，抗力強。

3、采用單片機+液晶屏的對話界面，自動調節抽氣壓力，自動計時，當達到60分鐘時，自動報警，提示試驗操作人員及時取出油杯。

4、用空氣泵抽真空，使負壓能很精確地維持在196±2Pa（20±0.2mmH2O）范圍內。

JSH2402 automatic lubricating oil evaporation loss tester

A, in line with SH/T0059, ASTMD5800 standards

Ii. Main Technical parameters:

Hot bath size: Φ 60 x 48 (mm) metal bath

Heating power: 2 KW

Working temperature: normal temperature ~ 250±0.5℃

Negative pressure detection: pressure sensor and inclined tube manometer

Temperature measurement and control: digital display temperature controller automatically measures and controls the temperature

Control mode: SCM automatically adjust the pressure, automatic timing, alarm.

Pumping mode: Air pump pumping

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. The heating body adopts the slab structure, that is, the heating plate at the bottom and the heating ring around it. The heating body is not easy to burn out and has a long life.

2. Temperature control adopts digital display temperature controller to automatically control temperature in PID mode, with high temperature control precision and strong anti-interference ability.

3. Adopting the dialogue interface of single chip microcomputer and LIQUID crystal screen, the air extraction pressure is automatically adjusted and the timing is automatic. When it reaches 60 minutes, the alarm is automatically given to prompt the test operator to take out the oil cup in time.

4. Vacuum with air pump, the negative pressure can be maintained within the range of 196±2Pa (20± 0.2mmh2O) accurately.

關鍵詞：金屬浴壓力傳感器壓力計