產品簡介
----------------------------------------------------------------------
通用天然氣氣體泄漏濃度檢測探測報警器(Natural Gas Alarm)，簡稱天然氣檢測器，或天然氣探測器，或天然氣報警器，主要針對天然氣（即甲烷）氣體泄漏濃度檢測、濃度顯示及濃度超標后的聲光報警提醒，并可聯動然氣電磁閥，一旦泄露，及時切斷。
目前，國家對天然氣氣體泄漏檢測報警器要求嚴格，廠家必須具有*，并且機器上貼有3C標簽及消防標簽，天然氣氣體報警器由氣體探測器(Gas Detector)和氣體報警控制器(Gas Controller)，氣體報警控制器必須配置備電。
氣體簡介：天然氣主要組成部分為甲烷（85%）和少量的乙烷、丙烷等氣體。也有人稱為“沼氣"。我們這里主要是說天然氣管道的天燃?xì)?。天然氣的檢測量程為0-LEL。天然氣比空氣輕，所以天然氣探測器的安裝位置在泄漏源的上方。
天然氣氣體報警器使用比較多的場所：加氣站、酒店廚房、學校餐廳等存在天然氣氣體的場所。
天然氣氣體報警器產品特點：
◆ 測量準確：傳感器采用進口氣體敏感元件，精度高，零點漂移小，抗中毒性能好。
◆ 防爆設計：可用于工廠條件的1、2區危險場合。
◆ 維修方便：傳感器采用數字化模組設計，現場更換時無需校零、標定。
◆ 聲光報警：氣體探測器可選配專用的防爆聲光報警器，實現現場聲光報警。
◆ 濃度顯示：氣體探測器可選配液晶濃度顯示，現場實時顯示濃度。
天然氣氣體報警器技術參數
| 檢測氣體 | 天然氣 | 檢測原理 | 催化燃燒式 |
| 檢測范圍 | 0-LEL | 供電電源 | DC36V±15% |
| 功率 | ＜1W | 通訊方式 | M-BUS 兩總線 |
| 信號輸出 | 一組無源常開信號 | 連接線纜 | RVS 2×2.5mm2 |
| 準 確 度 | ±5%FS | 響應時間 | 催化燃燒式 T90＜30s |
| 材 料 | 鑄鋁 | 防爆鏈接螺紋 | G3/4″內螺紋 |
| 防爆標志 | Exd IIC T6 Gb | IP等級 | IP65 |
| 工作溫度 | -40℃～70℃ | 濕度范圍 | 10%RH～95%RH |
| 壓力范圍 | 86Kpa～106Kpa | 存儲溫度 | -25℃～55℃ |
| 外形尺寸 | 190×130×75mm | 重 量 | 1.5kg |
| 安裝方式 | 貼壁式、抱管式、穿管式
|
Natural Gas Alarm
Natural gas alarm mainly detects natural gas (i.e. methane), detects and displays mainly the concentration of natural gas, sending audible and visual alarm when the concentration exceeding the scheduled standard. Linking together with gas solenoid valve, cut off gas supply immediately once leakage occurs.
The state is strict in gas alarm at present, the factory must own 3C authentication. All equipment must stick 3C label & Explosion-proof label. Natural gas alarm is consists of detector and alarm control, the last must configure power reservation.
Natural gas alarm is used in more sites, such as gas station, kitchen, canteen and so on, in which gas exists.
product features
? Accurate measurement: sensor with imported gas sensory unit, high precision, little zero shift, good anti-poisoning.
? Explosion-proof design: suitable for 1 and 2 dangerous areas in factories.
? Maintenance-free: the imported digital module in sensor easily removed for field replacement, no zero setting, no calibration.
? Audible and visual alarm: realize audible and visual alarm on spot, if combined special Explosion-proof aural and visual alarm
? Concentration display: real-time display concentration on spot, if LCD selected.
Technical params
? Gas detection: Natural gas(methane)
? Detection principle: Catalytic combustion type
? Detection range: 0-LEL
? Power Supply Voltage: DC36V±15%
? capacity factor: ＜1W
? Communication: two M-BUS
? Signal output: A group signal of passive constant opening
? Connection wires: RVS 2×2.5mm2
? Accuracy: ±5%FS
? Response time: T90＜30s (Catalytic combustion)
? Materials: Cast aluminum
? Explosion-proof connection screw thread: G3/4″ internal thread
? Outline dimension: 190×130×75mm
? Weight: 1.5kg
? IP degree: IP65
? Working temperature: -40℃～70℃
? Humidity range: 10%RH～95%RH
? Pressure range: 86Kpa～106Kpa
? Storage temperature: -25℃～55℃
? Installment: Wall mounted, embracing tube type, passing tube type
會員1.png)
