污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
東莞市百航儀器有限公司
東莞市百航儀器有限公司
導軌測試機，抽屜導軌疲勞測試機 本機特點：本試驗機根據GB,EN測試標準設計，廣泛用于各種櫥柜抽屜滑軌，浴室柜抽屜滑軌，阻尼滑軌，隱藏式滑軌測試.采用微電腦plc程序控制，觸摸屏顯示，全智能化，操作方便，推拉行程可調，推拉頻率次數可調，到達設定的次數自動停機
導軌測試機，抽屜導軌疲勞測試機
本機特點：本試驗機根據GB,EN測試標準設計，廣泛用于各種櫥柜抽屜滑軌，浴室柜抽屜滑軌，阻尼滑軌，隱藏式滑軌測試.采用微電腦plc程序控制，觸摸屏顯示，全智能化，操作方便，推拉行程可調，推拉頻率次數可調，到達設定的次數自動停機。進行推拉往復運動，可無人看管長時間工作。測試完成自動停機，停電記憶、自動保存數據、低電壓工作，尤其適用于具有緩沖功能的滑軌，比如當推到滑軌可以自動關閉的行程，停止推，等抽屜滑軌自動關閉后再拉出來，還可以設置推拉到底停頓的時間。Features of the machine: the machine is designed according to GB and en test standards, widely used for testing all kinds of cabinet drawer slideways, bathroom cabinet drawer slideways, damping slideways and hidden slideways. It adopts microcomputer PLC program control, touch-screen display, full intelligence, easy operation, adjustable push-pull stroke, adjustable push-pull frequency, and automatic stop when reaching the set number. Push and pull reciprocating movement, unattended long-time work. After the test, the automatic stop, power-off memory, automatic data saving and low-voltage work are completed, especially for the slide rail with buffer function. For example, when the slide rail is pushed to the stroke that can be automatically closed, stop pushing, pull out after the drawer slide rail is automatically closed, and set the time for pushing and pulling to the end of pause.
主要技術參數。
l 1. 往復推拉速度頻率可調節速度；（1-15次/分鐘）
l 2. 可設定測試次數，達到設定值自動停機；（1-999999）
l 3. 測試推拉行程設置（100-600Mm）
l 4. 控制方式：PLC控制；可控制滑軌推拉到底停頓時間。
l 5.抽屜滑軌安裝寬度100-800MM可調。滑軌安裝板采用直徑30Mm導桿,直線軸承滑動調節寬度
l 6.測試工位：1工位，電控箱直接放到機臺電機側面，便于操作。
l 7.步進電機PLC程序控制精度高。
l 8.電源220V/60h或。
l 9.滑軌安裝孔位按滑軌實際定做。
l 10.設備負載45KG（可定制）
1. Reciprocating push-pull speed frequency adjustable speed; (1-15 times / min)
L 2. The test times can be set to automatically stop when the set value is reached; (1-99999)
L 3. Test push-pull stroke setting (100-600mm)
L 4. Control mode: PLC control; it can control the stop time of sliding rail pushing and pulling to the end.
L 5. The installation width of drawer slide is 100-800mm adjustable. The guide rod with diameter of 30mm is adopted for the slide rail mounting plate, and the sliding width of linear bearing is adjusted
6. Test station: 1 station, the electric control box is directly placed on the side of the machine motor, easy to operate.
L 7. PLC program control accuracy of stepping motor is high.
L 8. Power supply 220V / 60H or specified.
L 9. The installation hole position of the slide rail shall be customized according to the actual situation of the slide rail.
L 10. Maximum load of equipment 45kg (customizable)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
