污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
無錫耐玖機電設備有限公司
無錫耐玖機電設備有限公司
暫無信息 |
JTDM-25/JTDM-25聯立桌式雙工位多頭攻絲機(雙工位多軸攻絲機),兩工位工牙，操作簡單。雙工位多軸攻絲機廣泛應用于機械制造業,如閥門制造業,水暖五金業,汽車摩托配件,有色金屬壓鑄加工業,電子及零部件加工等行業中加工螺紋孔。一個面孔多，一次無法完成全部螺紋孔攻牙作業。雙工位多軸攻絲機可雙分兩個工位完成螺紋攻牙作業。兩工位獨立操作，只需一人操作。為企業減少人員成本，及更大的降低企業加工成本，......
JTDM-25/JTDM-25聯立桌式雙工位多頭攻絲機(雙工位多軸攻絲機)
JTDM-25 / JTDM-25 Joint Table Double Job Long Threading Machine(Double Work Multi-axis Threading Machine)
JTDM-25/JTDM-25聯立桌式雙工位攻絲機(雙工位多軸攻絲機),兩工位都采用導螺桿自動進刀，等距攻牙，斜坡式排削（磚利設計）。加工時切削液自動供給，上、下限位采用電子感應開關，設備調節方便，自動化程度高，操作簡單。設備有自動，手動功能。
JTDM-25 / JTDM-25 joint table double position long tie-tapping machine(double position multi-axis tie-tapping machine), two positions of work teeth, simple operation. Widely used in machinery manufacturing, such as valve manufacturing, plumbing hardware industry, automotive motorcycle accessories, non-ferrous metal die-casting processing industry, electronics and parts processing and other industries processed thread holes. One face more than one, can not complete all the thread hole attack tooth work. Can be divided into two positions to complete the thread tooth work. Two positions are operated independently and only one person is required to operate. For enterprises to reduce the cost of personnel, and a greater reduction in enterprise processing costs, so that the economic benefits of enterprises greater.
JTDM-25 / JTDM-25 stａnd table double position tie-tapping machine(double position multi-axis tie-tapping machine), both positions use a guide screw automatic approach knife, equidistant attack teeth, slope type layout(patent design). Automatic supply of cutting fluid during processing, electronic sensor switch for upper and lower limit, easy to adjust, high degree of automation, simple operation. The device has automatic, manual functions.
JTDM-25/JTDM-25聯立桌式雙工位攻絲機(雙工位多軸攻絲機)詳細參數
JTDM-25 / JTDM-25 Detailed parameters for a double-position wire-tapping machine(dual-position multi-axis wire-tapping machine)
| 規格 | JTDM-25/JTDM-25 | |
| 工作桌面有效尺寸 | 1120×550 | |
| 立柱外徑 | Φ102/Φ102 | |
| 主軸外徑 | Φ95/Φ95 | |
| 主軸錐度 | MT3/MT3 | |
| 主軸心至工作桌面距離 | 350-850MM-350-850MM | |
| 主軸行程 | 80MM/80MM | |
| 主軸轉速 | 定速/定速（可選配變頻調速） | |
| 主軸功率 | 2HP/8P / 2HP/8P | |
| *大鉆孔、攻牙能力 | (S45C)M25/M25 | |
| 總重量 | 900kg | |
| 注：雙聯型機床可以根據客戶加工工件工藝要求任意組合，可以組合為JTDZ-25/JTDZ-25 (雙工位兩鉆)、JTDM-25/JTDM-25(雙工位兩攻)、JTDZ-25/JTDM-25(雙工位一鉆一攻) | ||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
